1 155 mbps bi-directional single fiber transceiver b-13/15-155-tpm-sxx3-60 features ? coaxial single mode single fber package with optional sc/fc/st/mu connector ? wavelength tx 1310nm/ rx 1550nm ? sonet oc-3 sdh stm-1(s-1.1) compliant ? single +5v power supply ? pecl differential inputs and outputs ? wave solderable and aqueous washable ? led multisourced 1x9 transceiver interchangeable ? class 1 laser int. safety standad iec 825 compliant ? uncooled laser diode with mqw structure ? complies with telcordia (bellcore) gr-468-core ? temperature range: 0 to 70oc ? optical isolation >30 db ? cross talk < -33 db ? optical return loss > 14db parameter symbol min. max. unit note power supply voltage v cc 0 6 v input voltage - gnd v cc v output current i out 0 30 ma soldering temperature - - 260 oc 10 seconds on leads only operating temperature t opr 0 70 oc storage temperature t stg -40 85 oc absolute maximum rating parameter symbol min. typ. max. unit power supply voltage v cc 4.75 5 5.25 v operating temperature t opr 0 - 70 oc data rate - - 155 - mbps recommended operating condition parameter symbol min typical max unit notes optical optical transmit power p o -15 - -8 dbm output power is coupled into a 9/125 m single mode fber output center wavelength 1261 1310 1360 nm output spectrum width - - 6 nm rms ( ) extinction ratio er 8.2 - - db output pulse mask compliant with fddi smf-pmd1 output eye t compliant with bellcore tr-nwt-000253 and itu recommendation g.957 optical rise time t r - - 2 ns 10% to 90% values optical fall time t f - - 2 ns 10% to 90% values optical isolation - 30 - - db tx:1310 nm/ rx:1550 nm optical return loss - 14 - - db relative intensity noise rin - - -116 db/hz total jitter tj - - 1.2 ns measured with 2 23 -1 prbs with 72 ones and 72 zeros. transmitter specifcations, (0oc 2 155 mbps bi-directional single fiber transceiver b-13/15-155-tpm-sxx3-60 parameter symbol min typical max unit notes electrical power supply current i cc - - 140 ma maximum current is specifed at vcc= maximum @ maximum temperature data input current-low i il -350 - - a data input current-high i ih - - 350 a differential input voltage v ih -v il 300 - - mv data input voltage-low v il -v cc -2.0 - -1.58 v these inputs are compatible with 10k, 10kh and 100k ecl and pecl inputs data input voltage-high v ih -v cc -1.1 - -0.74 v transmitter specifcations, (0oc 3 155 mbps bi-directional single fiber transceiver b-13/15-155-tpm-sxx3-60 warnings connection diagram 1. (rx gnd) 2. (rx +) nc 3. (rx-) 4. (sd) 5. (rx vcc) top view 6. (tx vcc) 7. (tx-) nc 8. (tx+) 9. (tx gnd) receiver signal ground receiver data out receiver data out bar signal detect receiver power supply transmitter power supply transmitter data in bar transmitter data in transmitter signal ground pin symbol notes 1 rxgnd directly connect this pin to the receiver ground plane 2 rd+ see recommended circuit schematic 3 rd- see recommended circuit schematic 4 sd active high on this indicates a received optical signal 5 rxvcc +5v dc power for the receiver section 6 txvcc +5 v dc power for the transmitter section 7 td- see recommended circuit schematic 8 td+ see recommended circuit schematic 9 txgnd directly connect this pin to the transmitter ground plane
4 155 mbps bi-directional single fiber transceiver b-13/15-155-tpm-sxx3-60 recommended circuit schematic the split-loaded terminations for ecl signals need to be located at the input of devices receiving those ecl signals. the power supply fltering is required for good emi performance. use short tracks from the inductor l1/l2 to the module rx vcc. a gnd plane under the module is required for good emi and sensitivity performance. package diagram b-13/15-155-tpm-ssc (fc/st/mu) 3-60. units in mm (inch)
important notice! all information contained in this document is subject to change without notice, at luminent? s sole and absolute discretion. luminent warrants performance of its products to current specifcations only in accordance with the company?s standard one-year warranty; however, specifcations designated as preliminary are given to describe components only, and luminent expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, ftness for a particular purpose, and non-infringement of proprietary rights. please refer to the company?s terms and conditions of sale for further warranty information. luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. no license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and luminent makes no representa - tions or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. luminent customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify luminent for any damages resulting from such use or sale. the information contained in this document is provided on an as is basis. customer agrees that luminent is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. customer must contact lumi - nent to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. ? luminent, inc. 2003 all rights reserved handling precautions: this device is susceptible to damage as a result of electrostatic discharge (esd). a static free environment is highly recommended. follow guidelines according to proper esd procedures. laser safety: radiation emitted by laser devices can be dangerous to human eyes. avoid eye exposure to direct or indirect radiation. 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 ? luminent.com 5 lumnds587-0803 155 gbps bi-directional single fiber transceiver b-13/15-155-tpm-sxx3-60 warnings legal notice ordering information b - 13/15- 155 - tpm - s xx3-60 ? wavelength tx wavelength=1310nm rx wavelength = 1550nm ? communication protocol (155 mbps) ? connector options ? +5 v transceiver ? single mode fber
|
